×

shop by category

Home

Filters

There are 21 products.

Products per page: Sort by:
Reference: KODV-COVSMSM
COVERALL SMS Coverall
Made from SMS (polypropylene/breathable membrane/polypropylene) material. Antistatic. EN 13034 TYPE 6      EN 13982-1 TYPE 5     EN 1149-5
Reference: KODV-SPFH001
Disposable Protective coverall, 4B+5B+6B
Made of microporous polypropylene coated with a PE layer, antistatic. Elastic bands on the hood, cuffs, waist, and ankles ensure maximum protection and tightness. EN 14126          EN 13034          EN 13982          EN 1073             EN 14605
Reference: KODV-SPFH002
Disposable Protective coverall, 5B+6B
Made of microporous polypropylene coated with a PE layer, antistatic. EN 1073            EN 13982-1 TYPE 5    EN 13034 TYPE 6 (6B)      EN 1149
Reference: CHDV-0002
Disposable gown with snaps
Disposable gown made of polypropylene fastened with 4-part plastic snaps.
Reference: CUAP-ASTROCAP
Protective face cover disposable Astrocap
High-quality, breathable, universal size face cover with attached 3-layer 25gsm+25gsm+25gsm face mask tested according to EN 14683 and TYPE IIR performance level, designed to protect against bacteria both from outside and inside.
Reference: KODV-COVER
Disposable White coverall Type 5-6
Made of non-woven polypropylene coated with breathable microporous film. Seams reinforced with overlock stitching. A hood with an elastic drawstring around the face. An elastic band sewn into the waist area helps the garment fit better to the body. EN 13034/05+A1/09      EN 13982-1/05+A1/11
Reference: AKDF-V001
Akiniai apsauginiai su vožtuvais ir gumele
Safety goggles are sealed and feature 4 indirect ventilation ports. Designed for indoor work, they provide an excellent, undistorted view. Can be worn in combination with respiratory protection (respirator or half-mask).
Reference: AKDK-0002
Akiniai su šonine apsauga, skaidrūs
Safety glasses with clear lenses. They feature a modern design and are very comfortable to wear not only at work but also during leisure time.
Reference: KODV-TC0103
Disposable coverall Type 4B/5B/6B TC0103-Mic
Microporous coverall made with a 3-piece elastic hood for optimal fit. EN 1073-2             EN 14126       EN 14605 TYPE 4  EN 13982-1 TYPE 5 EN 13034 TYPE 6    EN 1149-5
Reference: AKDK-CR01
Glasses with side protection
Protective glasses with yellow lenses. They feature a modern design and are very comfortable to wear not only during work but also in leisure time. These glasses are designed for indoor and outdoor work - ensuring an undistorted panoramic view and side protection.
Reference: KODV-TC0104
Disposable coverall Type 5-6 TC0104
Made of microporous polypropylene coated with a PE layer, antistatic. EN 1073            EN 13982-1 TYPE 5      EN 14605 TYPE 4 EN 13034 TYPE 6 (6B)      EN 1149
Reference: KPDV-01
Disposable gathered cap (100 pcs)
Cap - disposable, blue, the cover is surrounded by an elastic double band that fits easily on the head. Made of polypropylene.
Reference: AUDA-P01G
Headband Ear Muffs 25 dB
Protective ear muffs with a headband. Protection level 25 dB. Attenuates high and low frequency sounds.
Reference: AUDA-SAL1
Helmet-Mounted Ear Muffs 23 dB
Protective ear muffs attachable to the helmet. Protection level 23 dB. Attenuates high-frequency sounds.
Reference: BAGV4-P0V
Pvc shoes 900P
Boots - ankle-high, antistatic, with energy absorption in the heel area. Upper - green color, sole - patterned, light.
Reference: BAGV4-RB01
RB001 Pvc shoes with Nitrile S5
Boot upper made of PVC resistant to petroleum products (oils, greases, etc.) and low-concentration chemicals. Lining: textile.
Reference: BAGV4-TERM
Rubber shoes with composite toe cap Terminator S5
The upper of the rubber boots is made of PVC, resistant to petroleum products (lubricants, oils, etc.) and low concentrations of chemicals.
Reference: SADS-ALTAY
Altay Climbing Helmet
Extremely impact and heat resistant ABS (acrylonitrile butadiene styrene) shell. Special shell expansions for ears. Adjustable chin strap included. Size is easily adjustable with a ratchet.
Reference: SADS-GE
ABS Gears Helmet
Extremely impact and heat resistant ABS (acrylonitrile butadiene styrene) shell. Special shell expansions for ears. “M” type top reinforcement.
Reference: SKDL-P01
Protective screen holder
Protective screen holder designed for attaching protective shields. Size can be adjusted, with 3 fixed shield positions.
Reference: SKDL-S02
Protective screen holder mounted on helmet
The holder is designed for attaching protective shields. The holder is universal, mounted on an industrial safety helmet, and fixed in 3 positions.