×

shop by category

Home

Filters
Footwear technology
Technology

There are 83 products.

Products per page: Sort by:
Reference: KODV-COVSMSM
COVERALL SMS Coverall
Made from SMS (polypropylene/breathable membrane/polypropylene) material. Antistatic. EN 13034 TYPE 6      EN 13982-1 TYPE 5     EN 1149-5
Reference: KODV-SPFH001
Disposable Protective coverall, 4B+5B+6B
Made of microporous polypropylene coated with a PE layer, antistatic. Elastic bands on the hood, cuffs, waist, and ankles ensure maximum protection and tightness. EN 14126          EN 13034          EN 13982          EN 1073             EN 14605
Reference: KODV-SPFH002
Disposable Protective coverall, 5B+6B
Made of microporous polypropylene coated with a PE layer, antistatic. EN 1073            EN 13982-1 TYPE 5    EN 13034 TYPE 6 (6B)      EN 1149
Reference: PRDA-0123
Gloves coated with PU, Monte 123
Polyamide gloves, palm and fingertips coated with white polyurethane (PU). Cuff - knitted.
Reference: KODV-COVER
Disposable White coverall Type 5-6
Made of non-woven polypropylene coated with breathable microporous film. Seams reinforced with overlock stitching. A hood with an elastic drawstring around the face. An elastic band sewn into the waist area helps the garment fit better to the body. EN 13034/05+A1/09      EN 13982-1/05+A1/11
Reference: AKDF-V001
Akiniai apsauginiai su vožtuvais ir gumele
Safety goggles are sealed and feature 4 indirect ventilation ports. Designed for indoor work, they provide an excellent, undistorted view. Can be worn in combination with respiratory protection (respirator or half-mask).
Reference: AKDK-0002
Akiniai su šonine apsauga, skaidrūs
Safety glasses with clear lenses. They feature a modern design and are very comfortable to wear not only at work but also during leisure time.
Reference: KODV-TC0103
Disposable coverall Type 4B/5B/6B TC0103-Mic
Microporous coverall made with a 3-piece elastic hood for optimal fit. EN 1073-2             EN 14126       EN 14605 TYPE 4  EN 13982-1 TYPE 5 EN 13034 TYPE 6    EN 1149-5
Reference: PRDM-0000
Knitted gloves without Pvc dots M1
Knitted gloves. Fit perfectly in the hand. Extended knitted cuff
Reference: AKDK-CR01
Glasses with side protection
Protective glasses with yellow lenses. They feature a modern design and are very comfortable to wear not only during work but also in leisure time. These glasses are designed for indoor and outdoor work - ensuring an undistorted panoramic view and side protection.
Reference: KODV-TC0104
Disposable coverall Type 5-6 TC0104
Made of microporous polypropylene coated with a PE layer, antistatic. EN 1073            EN 13982-1 TYPE 5      EN 14605 TYPE 4 EN 13034 TYPE 6 (6B)      EN 1149
Reference: PRDM-V002
Knitted gloves with Pvc dots (double-sided) M52
Dense (7-gauge) knitted gloves made of cotton and polyester with PVC dots on both sides. The cuff is knitted with a sewn edge. The PVC coating on the fingertips is wider, which extends the glove's service life.
Reference: PRDM-VE02
Knitted gloves with Pvc dots Eco (single-sided) M51
Dense (7-gauge) knitted gloves made of cotton and polyester with PVC dots on one side. The cuff is knitted with a sewn edge. The PVC coating on the fingertips is wider, which extends the glove's service life.
Reference: AUDK-ORSO
Soft Ear Plugs
Protective earplugs. Protection level 34 dB. The plugs are made of slow-recovery polyurethane foam.
Reference: BAGV4-P0V
Pvc shoes 900P
Boots - ankle-high, antistatic, with energy absorption in the heel area. Upper - green color, sole - patterned, light.
Reference: BAGV4-RB01
RB001 Pvc shoes with Nitrile S5
Boot upper made of PVC resistant to petroleum products (oils, greases, etc.) and low-concentration chemicals. Lining: textile.
Reference: BAGV4-TERM
Rubber shoes with composite toe cap Terminator S5
The upper of the rubber boots is made of PVC, resistant to petroleum products (lubricants, oils, etc.) and low concentrations of chemicals.
Reference: KPDS-KAPS
Protective Cap
Cap - for protection against impacts and collisions with obstacles. This protective cap is not intended to protect against falling objects.
Reference: BAOD1-CRAZY6
Low cut shoes Crazy Rider S3 SRC HRO
Upper - natural impregnated leather. The leather joints of the upper are double-stitched. The back part of the shoe is reinforced with specially treated, abrasion-resistant material.
Reference: BAOD1-GE02
Leather low cut shoes Dhaka Gears Safety S1 SRC
Upper made of natural, textured leather. Lining - antibacterial textile that absorbs sweat. Leather joints of the upper are quadruple-stitched with a contrasting insert.
Reference: BAOD1-KEE6
Low cut shoes Keeper Light Rtx S3
Upper made of natural, textured leather. Lining - antibacterial textile that absorbs sweat. Leather joints of the upper are double-stitched.
Reference: BAOD1-MD03
Leather low cut shoes Gears S3 SA1019
Upper made of natural, textured leather. Lining - antibacterial textile that absorbs sweat. Leather joints of the upper are double-stitched. Reflective detail in the heel area.
Reference: BAOD1-MON6
Leather low cut shoes Monro Rewelly S3 SRC
Upper made of natural, textured leather. Lining - antibacterial textile that absorbs sweat. Leather joints are triple-stitched. Reflective detail in the heel area.
Reference: BAOD1-POLLO
Low cut shoes Pollo Gds123 Rewelly S3 SRC
The shoe upper is made of continuous natural smooth FULL GRAIN leather, which is of the highest quality. Insole is thermally molded, antibacterial, and antistatic.