×

shop by category

Home

Filters
Sole protection

There are 57 products.

Products per page: Sort by:
Reference: KODV-COVSMSM
COVERALL SMS Coverall
Made from SMS (polypropylene/breathable membrane/polypropylene) material. Antistatic. EN 13034 TYPE 6      EN 13982-1 TYPE 5     EN 1149-5
Reference: KODV-SPFH001
Disposable Protective coverall, 4B+5B+6B
Made of microporous polypropylene coated with a PE layer, antistatic. Elastic bands on the hood, cuffs, waist, and ankles ensure maximum protection and tightness. EN 14126          EN 13034          EN 13982          EN 1073             EN 14605
Reference: KODV-SPFH002
Disposable Protective coverall, 5B+6B
Made of microporous polypropylene coated with a PE layer, antistatic. EN 1073            EN 13982-1 TYPE 5    EN 13034 TYPE 6 (6B)      EN 1149
Reference: KODV-COVER
Disposable White coverall Type 5-6
Made of non-woven polypropylene coated with breathable microporous film. Seams reinforced with overlock stitching. A hood with an elastic drawstring around the face. An elastic band sewn into the waist area helps the garment fit better to the body. EN 13034/05+A1/09      EN 13982-1/05+A1/11
Reference: AKDF-V001
Akiniai apsauginiai su vožtuvais ir gumele
Safety goggles are sealed and feature 4 indirect ventilation ports. Designed for indoor work, they provide an excellent, undistorted view. Can be worn in combination with respiratory protection (respirator or half-mask).
Reference: AKDK-0002
Akiniai su šonine apsauga, skaidrūs
Safety glasses with clear lenses. They feature a modern design and are very comfortable to wear not only at work but also during leisure time.
Reference: KODV-TC0103
Disposable coverall Type 4B/5B/6B TC0103-Mic
Microporous coverall made with a 3-piece elastic hood for optimal fit. EN 1073-2             EN 14126       EN 14605 TYPE 4  EN 13982-1 TYPE 5 EN 13034 TYPE 6    EN 1149-5
Reference: PRDM-0000
Knitted gloves without Pvc dots M1
Knitted gloves. Fit perfectly in the hand. Extended knitted cuff
Reference: AKDK-CR01
Glasses with side protection
Protective glasses with yellow lenses. They feature a modern design and are very comfortable to wear not only during work but also in leisure time. These glasses are designed for indoor and outdoor work - ensuring an undistorted panoramic view and side protection.
Reference: KODV-TC0104
Disposable coverall Type 5-6 TC0104
Made of microporous polypropylene coated with a PE layer, antistatic. EN 1073            EN 13982-1 TYPE 5      EN 14605 TYPE 4 EN 13034 TYPE 6 (6B)      EN 1149
Reference: PRDM-V002
Knitted gloves with Pvc dots (double-sided) M52
Dense (7-gauge) knitted gloves made of cotton and polyester with PVC dots on both sides. The cuff is knitted with a sewn edge. The PVC coating on the fingertips is wider, which extends the glove's service life.
Reference: PRDM-VE02
Knitted gloves with Pvc dots Eco (single-sided) M51
Dense (7-gauge) knitted gloves made of cotton and polyester with PVC dots on one side. The cuff is knitted with a sewn edge. The PVC coating on the fingertips is wider, which extends the glove's service life.
Reference: KEKI-STRE
Detachable Stretch Rewelly pockets
Detachable hanging tool pockets with several additional sections.
Reference: BAGV4-P0V
Pvc shoes 900P
Boots - ankle-high, antistatic, with energy absorption in the heel area. Upper - green color, sole - patterned, light.
Reference: BAGV4-RB01
RB001 Pvc shoes with Nitrile S5
Boot upper made of PVC resistant to petroleum products (oils, greases, etc.) and low-concentration chemicals. Lining: textile.
Reference: BAGV4-TERM
Rubber shoes with composite toe cap Terminator S5
The upper of the rubber boots is made of PVC, resistant to petroleum products (lubricants, oils, etc.) and low concentrations of chemicals.
Reference: KPDS-KAPS
Protective Cap
Cap - for protection against impacts and collisions with obstacles. This protective cap is not intended to protect against falling objects.
Reference: BAOD1-SERE6
Low cut shoes Serena Gds119 Rewelly S1P SRC ESD
ESD half boots upper made of microfiber, perforated to provide good ventilation to the wearer. Breathable mesh lining.
Reference: SKDL-P01
Protective screen holder
Protective screen holder designed for attaching protective shields. Size can be adjusted, with 3 fixed shield positions.
Reference: SKDL-S02
Protective screen holder mounted on helmet
The holder is designed for attaching protective shields. The holder is universal, mounted on an industrial safety helmet, and fixed in 3 positions.
Reference: BAOD1-VEG5
Vega Light Monte S1P low cut shoes
Stylish and modern with a knitted seamless technology upper made of nylon, featuring maximum air and moisture circulation. Laced through 4 pairs of eyelets.
Reference: BAOD2-NOVA
Nova Gds120 Rewelly shoes with shaft, S3 SRC ESD
ESD shoe upper made of microfiber, laser perforated to provide good ventilation for the wearer. Breathable mesh lining.
Reference: BAOV1-RAFA6
Rafa Gds118 Rewelly, S1P SRC ESD sandals
ESD sandal upper made of microfiber, perforated to provide good ventilation for the wearer. Breathable mesh lining.
Reference: BAOD1-COBRA
Cobra Rewelly S1P SRC shoes
BAOD1-COBRA – sporty S1P safety trainers engineered for dynamic working environments where lightweight comfort, flexibility, and reliable protection are essential throughout the entire workday. The model is made from highly durable diamond-pattern Lixin material combined with breathable acrylic cotton, and features an XL fiberglass toe cap, flexible Kevlar-type anti-perforation midsole, and a quick fastening system, while the EVA/Nitrile SRC outsole provides excellent grip, resistance to petroleum-based substances, and effective shock absorption; antistatic properties and EN ISO 20345 certification ensure professional-grade safety performance.